h\How to use GENOTROPIN MiniQuick. The GENOTROPIN MiniQuick is a single-use, pre-filled device for delivering human growth hormone (somatropin) injections. This device is specifically designed for convenience and ease of use, and it doesn’t require refrigeration before mixing. Here’s a detailed guide on how to properly use the GENOTROPIN MiniQuick:
How to use GENOTROPIN MiniQuick
Before You Begin
- Wash Your Hands: Start with clean hands to reduce the risk of infection.
- Inspect the Device: Check the GENOTROPIN MiniQuick to make sure it’s the correct dose and not expired.
- Gather Supplies: You’ll need an alcohol swab and a disposal container for used needles.

Instructions for Use
1. Prepare the MiniQuick
- Remove the Cap: Twist off the protective cap from the MiniQuick device. This exposes the rubber stopper.
- Attach the Needle: Screw a sterile needle (included with the device) onto the MiniQuick device until it is secure.
2. Mix the Medication
- Turn the Plunger: With the needle pointing upward, twist the plunger clockwise until it will not turn further. This releases the diluent (liquid) into the growth hormone powder.
- Gently Mix: Gently rock the device back and forth to mix the powder and diluent. Do not shake the device, as shaking could damage the hormone.
3. Prime the Device (Remove Air Bubbles)
- Remove Air Bubbles: Hold the device with the needle pointing up. Tap the MiniQuick gently to bring any air bubbles to the top.
- Push the Plunger: Slowly push the plunger until a tiny drop of liquid appears at the needle tip, confirming that the device is primed.
4. Set the Dose
- The MiniQuick comes pre-set with a specific dose, so no adjustments are needed.
5. Choose an Injection Site
- Recommended Sites: The abdomen, thigh, or upper arm are commonly used injection sites. Rotate injection sites each time to prevent skin irritation.
- Clean the Site: Use an alcohol swab to clean the injection area, and let it air dry.
6. Administer the Injection
- Insert the Needle: Pinch the skin at the injection site and insert the needle at a 90-degree angle.
- Inject the Dose: Push the plunger all the way down to administer the full dose.
- Hold and Withdraw: After injecting, keep the needle in place for a few seconds to ensure the full dose is delivered. Then, remove the needle from the skin.
7. Dispose of the Needle and Device
- Discard the Needle: Carefully unscrew the needle and dispose of it in a sharps container.
- Dispose of the Device: Since the GENOTROPIN MiniQuick is single-use, dispose of the entire device after one use.
Storage and Handling
- Before Use: The GENOTROPIN MiniQuick can be stored at room temperature (up to 77°F / 25°C) for up to 3 months or in the refrigerator (36°F to 46°F / 2°C to 8°C) until the expiration date.
- After Mixing: Use the MiniQuick immediately after reconstitution (mixing), as it cannot be stored or reused.
Additional Tips
- Timing: Inject at the same time each day, if possible, for the best results.
- Check for Particles: Before injection, ensure the solution is clear and free of particles. If it’s cloudy or discolored, do not use it.
- Follow Up with Healthcare Provider: Regular follow-ups with your doctor are recommended to monitor response and adjust dosage if necessary. Above are Instructions on how to use GENOTROPIN MiniQuick from home with ease.
Always refer to the product’s patient information leaflet and consult your healthcare provider if you have any questions or concerns about administering GENOTROPIN MiniQuick. Buy Genotropin MiniQuick online from home. Genotropin MiniQuick for sale online. Buy somatropin online. Instructions on how to use GENOTROPIN MiniQuick